Connectors and Interfaces VC 1100
Version 2 → connect/VC1100E
3-6 C01 / C02 - C11 / C12 © Schenck VIBRO GmbH, D-64273 Darmstadt, November 97
Relay Reset
Use only galvanically free switches with the Relay-Reset Input to
manually reset latched relays. Latched relays can also be reset via
the operating panel or through the remote interface.
Fig. 3 - 4 : Connection of a galvanically free switch to the
Relay Reset-Input
To Next Page
Loading...