VC 1100 Connectors and Interfaces
VC1100E/connect Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, November 97 C01 / C02 - C11 / C12 3-5
Pickups
Two types of pickups can be connected:
a) Vibration Velocity Transducers
b) Vibration Acceleration Transducers (Accelerometers)
Velocity pickups and accelerometers have different interfaces. The
velocity transducer (Type VS - ...) is an active pickup, i.e. it does
not require a supply voltage. The cable has two conductors and a
shield.
The accelerometer (Type AS - ...) is a passive pickup, i.e. it has a
built-in charge amplifier which requires a supply voltage. VIBRO-
CONTROL 1100 supplies accelerometers with -24 V DC with a
max. current of 30 mA. The cable has of 4 conductors and a
shield.
Fig. 3 - 3 : Connecting Vibration Velocity and Vibration
Acceleration Transducer
rt = red, ws = white, sw = black, ge = yellow, br = brown,
ge/sw = yellow/black
Standard pickup cable length is 5 m (16 feet). A maximum cable
length of 200 m (600 feet) requires proper installation including
appropriate junction boxes and signal cables.
For more information, please consult the manual for the pickup
used.
To Next Page
Loading...