Schenck Vibrocontrol 110 C01 - Serial Interface Group P

VC 1100 List of Setup Parameters
VC1100E/paralist Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, Juni 98 C01 / C02 - C11 / C12 5-35
Serial Interface Group P
P 00 Remote I/O : Device Address
Choises : 1 ... 205
Function : Define a unique address for each VIBROCONTROL
1100
P 01 Serial Port 1 : Baud rate
Choises : 1200, 2400, 4800, 9600
Unit : Bit/s
Function : 1200 = Baud rate: 1200 Bd
2400 = Baud rate: 2400 Bd
4800 = Baud rate: 4800 Bd
9600 = Baud rate: 9600 Bd
P 02 Serial Port 2 : Baud rate
Choises : 1200, 2400, 4800, 9600
Unit : Bit/s
Function : Select baud rate for serial port 1.
1200 = Baud rate: 1200 Bd
2400 = Baud rate: 2400 Bd
4800 = Baud rate: 4800 Bd
9600 = Baud rate: 9600 Bd