VC 1100 Overview
VC1100E/overview Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, November 97 C01 / C02 - C11 / C12 1-1
1 Overview
VIBROCONTROL 1100 is a 2 channel microprocessor controlled
machine condition monitor. Vibration velocity transducers or vibra-
tion acceleration transducers (accelerometers) are used to sense
the vibrations from a machine.
VIBROCONTROL 1100 is a compact machine monitor. All com-
ponents, like power supply, connectors, signal conditioners, micro-
processor and operator panel are integrated to one splash- proofed
housing.
Figure 1-1: Top view of a VIBROCONTROL 1100 with cover removed
VIBROCONTROL 1100 is complete; there are no options. Three
alarm relays, one OK-relay, two analog outputs, two buffered out-
puts, remote I/O interface, and signal conditioners are built-in.
There are no jumpers or potentiometers. All functions are com-
pletely microprocessor controlled and are configured using the
built-in operator panel or via the remote interface with a computer
or process controller.
The wiring is done through removable terminal strip connectors.
Vibration analyzers or data collectors can be connected to the
buffered outputs without interrupting the monitoring functions.
To Next Page
Loading...