VC 1100 Built-in Operating Panel and Display
VC1100E/bult-in Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, November 97 C01 / C02 - C11 / C12 4-11
Check Relays
The service mode provides direct access to relay activation.
Indicates the test
function is active
Change the relay status by pressing
and .
Used to check operation of devices connected to the relays.
K1 off: Relay not active.
K1 on: Relay active
Press to exit test of relay K1.
Step to next function by pressing
.
Check relays K2 and K3:
Function S04 checks the OK-Relay.
OK off : OK-Relay not active.
OK on : OK-Relay active.
Press
to exit the OK-Relay test.
To Next Page
Loading...