Built-in Operating Panel and Display VC 1100
Version 2 → built-in/VC1100E
4-2 C01 / C02 - C11 / C12 © Schenck VIBRO GmbH, D-64273 Darmstadt, November 97
Display Setup Parameters
Starting point
During normal operation the display is dark. The main menu will
appear if any key is press.
Press any key.
The main menu appears.
Parameter value
Parameter number
Display Setup Parameters
Pressing this key at this time has no effect, since I01 is the first
parameter.
Step to the next parameter number.
Reach any parameter by pressing either the up or down arrow key.
Press and release the key to go to the next parameter (single
step). Press and hold the key if you want to scroll through the pa-
rameter numbers faster. The longer you hold a key down, the
faster the parameter numbers change. The last parameter is P02.
Exit "Display Setup Parameters" mode and return to the main
menu.
To Next Page
Loading...