VC 1100 Built-in Operating Panel and Display
VC1100E/bult-in Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, November 97 C01 / C02 - C11 / C12 4-15
A trip of relays K1, K2, or K3 generates the fol-
lowing Log Book entries:
Event Cause
K1 Cause Relay K1 is active.
See list of causes below.
K2 Cause Relay K2 is active.
See list of causes below.
K3 Cause Relay K3 is active.
See list of causes below.
Cause
Lim1A Channel A: Vibration exceeds lim_1
Lim2A Channel A: Vibration exceeds lim_2
LimbA Channel A: Bearing Condition exceeds lim_b
Lim1B Channel B: Vibration exceeds lim_1
Lim2B Channel B: Vibration exceeds lim_2
LimbB Channel B: Bearing Condition exceeds lim_b
Relay resets generate Log Book entries:
Event Cause
RESET DIALOG Relay reset via built-in operator panel
RESET EXTERN Relay reset via reset input
RESET RS-232 Relay reset via Remote-I/O
To Next Page
Loading...