VC 1100 Built-in Operating Panel and Display
VC1100E/bult-in Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, November 97 C01 / C02 - C11 / C12 4-19
Error
code
see page 20 Meaning (continued)
-63 w
The limit values are smaller than
10 % or larger than 100 % of the
corresponding measuring range
(M09/M10; M11/M12; M13/M14).
-65 w
An analog output has been confi-
gured to output BCU's and the
pickup type velocity transducer
(I03) has been selected.
-68
Parameter transfer is not possible
since presently another transfer is
made or the self-calibration is
running. Repeat the command!
To Next Page
Loading...