Schenck Vibrocontrol 110 C01 - Page 83

VC 1100 List of Setup Parameters
VC1100E/paralist Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, Juni 98 C01 / C02 - C11 / C12 5-25
M 13 Channel A : Limit value lim_b
Choises : 0.100 ... 140
Dimension : BCU
Resolution : 0.100 ... 0.999
1.00 ... 9.99
10.0 ... 99.9
100 ... 140
Function : Enter limit value lim_b, for bearing condition
channel A.
M 14 Channel B : Limit value lim_b
Choises : 0.100 ... 140
Dimension : BCU
Resolution : 0.100 ... 0.999
1.00 ... 9.99
10.0 ... 99.9
100 ... 140
Function : Enter limit value lim_b, for bearing condition
channel B.
M 15 Channel A : Alarm Delay Time lim_1
Choises : 1 ... 99
Dimension : Seconds
Function : Define alarm delay time for channel A lim_1.
M 16 Channel B : Alarm Delay Time lim_1
Choises : 1 ... 99
Dimension : Seconds
Function : Define alarm delay time for channel B lim_1.