Illustration 33: Mounting angle ................................................................................... 77
Illustration 34: Shunts between base frame and coupling rod ................................... 78
Illustration 35: Mounting angle ................................................................................... 78
Illustration 36: Shunts between lower frame and upper frame ................................... 79
Illustration 37: Mounting angle ................................................................................... 79
Illustration 38: Shunts between upper frame and rocker box / sliding strip ................ 80
Illustration 39: EXAMPLE: Adjustment of resting position (h
s
) ................................... 90
Illustration 40: EXAMPLE: Adjust support springs ..................................................... 92
Illustration 41: Adjustment of air bellow drive............................................................. 93
Illustration 42: Adjustment of blow off valve ............................................................... 94
Illustration 43: EXAMPLE: Attachment of measuring device ..................................... 95
Illustration 44: Adjustment of PRV1 ........................................................................... 97
Illustration 45: EXAMPLE: Adjust cam ....................................................................... 98
Illustration 46: EXAMPLE: Adjust length of coupling rod ......................................... 101
Illustration 47: Adjustment of TRV1 and TV1 ........................................................... 104
Illustration 48: EXAMPLE: Adjustment of turning capacity of pan head ................... 105
Illustration 49: Maintenance intervals mentioned in spare part catalogue ............... 109
To Next Page
Loading...
