SEON Explorer - Figure 3-7 Alarm Settings Sub-Menu; Table 3-10 Alarm Configuration Items

Configuring the DVR
3–14 700-0042 R004
To change a setting on the sub-menu:
1. Turn the
JOG wheel clockwise or counter clockwise to change the value.
2. Press the
LOCK > button to advance through the fields.
3. Press the
DISPLAY < button to move back through the fields.
The selected menu item is highlighted with a pale blue background.
4. Press the
CLEAR button to reload the default value into a field.
5. To enter the Alarm 1 Settings to Alarm 4 Settings, press the
ENTER button.
The Alarm 1 setting menu appears as shown in Figure 3-7.
6. Repeat these steps to set the Alarm Input, Alarm Duration, Camera Speed and
Quality. See Table 3-10.
7. To exit the menu, press the
MENU button.
Figure 3-7 Alarm settings sub-menu
Table 3-10 Alarm configuration items
Menu Item Description Values Default
ALARMS ON allows the Alarm input options to
control the individual alarms.
OFF disables all alarms, regardless of the
settings of the alarm input options.
ON, OFF ON
ALARM
INPUT 1 Alarm input controls the four individual
alarms.
ON, OFF ON
ALARM
INPUT 2 ON
ALARM
INPUT 3 OFF
ALARM
INPUT 4 OFF
ALARM
1 SETTINGS to
ALARM 4 SETTINGS
Allows you to set the individual settings
duration for the four alarm inputs.
Presents an alarm sub-
menu.
Not applicable