SEON Explorer - DVR Buttons; Table 1-2 Description of DVR Buttons

Introduction
700-0042 R004 1–5
1.3.2. DVR Buttons
The DVR buttons on the front panel illuminates when the buttons are activated.
The DVR buttons perform more than one function and are described briefly in
Table 1-2.
Chapter 4, “Operating the DVR” provides detailed information on using the DVR
buttons. See “4.1.1 Using the DVR buttons” on page 4–2.
Table 1-2 Description of DVR buttons
Button Description
POWER With the vehicle ignition turned OFF and the DVR powered off, pressing the POWER button
for 3 seconds powers up the DVR, but does not initiate recording.
With the vehicle ignition turned
OFF and the DVR still powered up in the RECORD DELAY-OFF
interval, pressing the
POWER button for 5 seconds powers down the DVR immediately.
With the vehicle ignition turned
ON, pressing the POWER button for 5 seconds during the
RECORD DELAY-ON interval powers up the DVR and starts recording.
FULL Use the FULL button in combination with one of the four camera buttons (CH1, CH2, CH3, CH4)
and the DVR displays the selected camera in full screen display mode.
MODE Pressing the MODE button changes the display.
ZOOM In full screen display mode, pressing the ZOOM button lets you zoom into the screen 2×.
DISPLAY <
<
While the DVR is recording in live mode, different information can be displayed on the
screen.
The < button is used to navigate the menus while configuring the DVR.
CLEAR When configuring the DVR, pressing the CLEAR button loads the factory default value into
the field being edited.
LOCK >
>
Pressing the LOCK button enables a One-Time password option.
The
LOCK > button is used to navigate the menus while configuring.
MENU Pressing the MENU button enters and exits the main menu of the DVR.
REC (CH1) Pressing the REC button starts the DVR recording if the DVR is not playing video or in the
menus. When the DVR is recording, the
REC button is illuminated.
REV.PLAY (CH2) During playback or when the video is stopped, pressing the REV.PLAY button starts playing
the video in reverse.
STOP (CH3) Pressing the STOP button stops the DVR from recording or playing.
PLAY (CH4) If the DVR is not recording, pressing the PLAY button plays the recorded video and audio.
PAUSE (5) Pressing the PAUSE button pauses the video playback and provides a still frame video image.
SEARCH (6) Pressing the SEARCH button provides a power search function that lets you quickly find the
desired information. Exit the Search menu by pressing the
MENU button.