SEON Explorer - Table 3-12 Timers Configuration Items

Configuring the DVR
700-0042 R004 3–17
4. Press the CLEAR button to reload the default value into a field.
5. To exit the menu, press the
MENU button.
6. Repeat these steps to set the Enable timers, Day, Start, End, and Set. See Table
3-12.
Table 3-12 Timers configuration items
Menu Item Description Values Default
ENABLE TIMERS Records at preset times during the day. The vehicle
ignition must be turned on for the timers to work.
Note: If the Timers are enabled and all the individual
timers are set to
OFF, the DVR will never start
recording. Either turn on an individual timer or set
Enable Timers to
OFF.
The Record Delay-On settings are overridden by the
timers, except for the first 30 seconds. If the system
is recording during a Timer interval, then the Record
Delay-Off settings overrides the timer once the
vehicle ignition is turned off.
ON, OFF (When turned ON,
the DVR does not record
unless a timer has been
turned
ON.)
OFF
DAY Set the timer to record every day, daily, every
weekday, or only on the weekend.
• SUN (Sunday)
•
MON (Monday)
•
TUE (Tuesday)
•
WED (Wednesday)
•
THU (Thursday)
•
FRI (Friday)
•
SAT (Saturday)
•
DLY (Daily)
•
WDAY (Weekday)
•
WKEND (Weekend)
DLY
START
Set the time in 12-hour or 24-hour format in the
TIME/DATE menu. Avoid overlapping the Start and
End time.
• 12:00:00a to 11:59:59p
• 00:00:00 to 23:59:59
12:00a
END Set the time in 12-hour or 24-hour format. • 12:00:00a to 11:59:59p
• 00:00:00 to 23:59:59
12:00a
SET Set the individual timer to ON or OFF. ON, OFF OFF