Configuring the DVR
700-0042 R004 3–23
Table 3-15
Network configuration items
Menu Item Description Values Default
DHCP If a DHCP server is being used,
select
ON. To assign specific network
parameters for IP Address, Subnet
Mask, Default Gateway, and DNS
Server, set the DHCP option to
OFF.
ON, OFF ON
IP
ADDRESS For the IP address, enter a static IP address for the DVR. Make
sure this address is not used by any other device on the
network. If there is a DHCP server on the network, make sure
the DVR IP address is not in the IP address range assigned by
the DHCP server.
192.168.010.248
SUBNET MASK Enter the subnet mask for the network (usually 255.255.255.0). 255.255.255.000
DEFAULT GATEWAY Enter the IP address of the router or gateway on the LAN. 192.168.010.001
DNS SERVER Enters the IP address of the DNS server on the network. 192.168.010.168
MAC ADDR The MAC address is fixed in the DVR and corresponds to the
unique ID of the internal Ethernet controller.
Not configurable
USER NAME Six different user names can be assigned access to the DVR over a network. The user
names are programmable.
• User 1 Name:
ADMIN
Password: 11111111
Level:
PLAY
• Users 2 to 4 Name: USER n
Password: nnnnnnnn
Level:
PLAY
• Users 5 to 6 Name: USER n
Password: nnnnnnnn
Level:
LIVE
LEVEL
There are two levels of network
access for the DVR:
PLAY and LIVE.
•
PLAY allows you to
view recorded video
on the DVR.
•
LIVE only lets you
see what the
DVR is
recording.
•1
PLAY
•2 PLAY
•3 PLAY
•4 PLAY
•5 LIVE
•6 LIVE
To Next Page
Loading...
