Servomex SERVOPRO MultiExact - A3 Implementation Guide for Modbus Communications (Option)104; A3.1 Introduction; A3.2 References; A3.3 Modbus Setup

Appendix MultiExact Gas Analyser
APPENDIX
A3 IMPLEMENTATION GUIDE FOR MODBUS COMMUNICATIONS
(OPTION)
A3.1 Introduction
This appendix details the implementation and use of the Modbus protocol in the
MultiExact analyser.
A3.2 References
Document "MODBUS over Serial Line Specification & Implementation guide V1.0
Nov 02" Modbus web site modbus.org
.
A3.3 Modbus Setup
The Modbus setup form will allow the user to configure the following parameters:
Default values are in Bold.
Parameters
Options
Comments
Address
1 to 247
Slave address of unit.
Mode
ASCII or RTU
Select serial transmission mode.
Baud rate
2400, 4800, 9600,
19200, 38400
Parity
Odd, Even, None.
104 05410001A / Revision 6