MultiExact Gas Analyser 10 – Storage and disposal
10 STORAGE AND DISPOSAL
10.1 Storage
Refit any protective plastic covers (see Section 3) and place the analyser and any
associated equipment in its original packaging before storage. Alternatively, seal it
inside a waterproof plastic bag, sack, or storage box.
Store the analyser and any associated equipment in a clean, dry area. Do not subject
it to excessively hot, cold, or humid conditions: see Section 2.2.
10.2 Disposal
Dispose of the analyser and any associated equipment safely, and in accordance with
all of your local and national safety and environmental requirements.
The analyser is not
suitable for disposal in municipal waste streams (such as
landfill sites, domestic recycling centres and so on). Refer to Appendix A7
for
disposal requirements in accordance with the WEEE Directive within the EC.
If you send the analyser to Servomex or your local Servomex agent for
disposal, it must be accompanied by a correctly completed decontamination
certificate.
05410001A / Revision 6 95
To Next Page
Loading...
Need help?
General
