BEFORE
WEIGHING
USING MORE CONVENIENTLY MAINTENANCE
TROUBLESHOOTING
FOR YOUR
INFORMATION
USING THE
BALANCE
41
îš„
Turning the Power OFF
1
Establish the weighing mode.
^
"Weighing", page 34
2
Press
If the status described below is not established, press again.
(the ready symbol) will light and the
standby mode will be established.
Normally, leave the balance on standby in this
state until the next weighing.
To shut the power off completely, disconnect the
AC adapter.
What is the standby mode?
This is the status in which the balance stands by, saving electricity although it can still be used
right away.
On pressing in the weighing mode the display is turned off, (the ready
symbol) is lit and the power saving status (standby mode) is established.
During the standby mode, the interior of the balance is powered and in the warming-up status,
ready for immediate use.
! Caution
Prohibitions
While [WAIT] or [SET] is displayed, on no account disconnect the AC
adaptor.
There is a risk that data in the scale will be corrupted.
The ready symbol lights up.
Ending Weighing
To Next Page
Loading...
Need help?
General
