86
V
Counting Pieces by Weight (Piece Counting)
8
APPLICATION FUNCTION MODE
Changing a Unit Weight, or Adding a New Unit Weight
1
Establish the piece counting mode.
In the weighing mode (mode where grams or
other units are displayed), long press
to switch to the application function
mode.
2
Select the item number whose unit
weight you want to change, or for
which you want to add a unit
weight.
Each time you press for about 3 seconds,
the next item number is displayed.
^
"Counting Numbers of Pieces", page 85
3
Place the container on the pan
and press
The balance will be tared.
4
Press twice.
The number of pieces used for setting will be
displayed.
5
Select the number of pieces used
for setting.
(Select the number of pieces used for setting.)
6
Put a quantity of the item to be
counted corresponding to the
selected "number of pieces used
for setting" into the container.
7
Check that (the stability mark)
lights up, then conrm.
[SET]
The unit weight will be added, and piece
counting will become possible.
! ! ! ! ! !5
! !-!-!-! !
! ! ! ! ! !5
! ! ! ! !1!0
! ! ! ! !1!0
To Next Page
Loading...
Need help?
General
