Shimadzu ATX-R Series User Manual

BEFORE
WEIGHING
MAINTENANCE
TROUBLESHOOTING
FOR YOUR
INFORMATION
USING THE
BALANCE
USING MORE CONVENIENTLY
111
V
Continued on next page
10
CONNECTION AND COMMUNICATION
WITH PERIPHERAL DEVICES
With ATX-R/ATY-R series balances, weight readings, settings and other data can be output to a
personal computer or a printer. This section describes some convenient functions relating to output, and
how to connect the balance to a PC or printer.
Use an optional dedicated printer.
The "Balance Keys" communication tool (freeware) is provided for use as a PC input tool.
Balance Data Collection Software, Balance Keys :
https://www.shimadzu.com/an/balance/balance_keys/index.html

Printing / Outputting Automatically (Auto Print Function)
This function allows you to automatically output the displayed weight reading at each weighing
without pressing
Select the output timing from among the following ve modes.
Stable
Positive
Value
Stable
Negative
Value
Stable
Zero
Indication
Pass in
Checkweighing
Mode
Explanation
Mode 1
L!D.! ! .
When stability is detected with a
positive value, the value is output.
Mode 2
L!D.U!L.
When stability is detected with
a positive or negative value, the
value is output.
Mode 3
L!D. ! .Z
When stability is detected with a
positive value, or when the reading
has returned to zero, the value is
output.
Mode 4
L!D.U!L.Z
When stability is detected with a
positive or negative value or when
the reading has returned to zero,
the value is output.
Mode 5
L!D.O!K.
When the auto print function
is used in combination with the
checkweighing mode (^ page
109) and stability is detected with
an "OK" determination, the value
is output.
: Output, Blank: Not output
1
Press for about
3 seconds in the weighing mode.
This opens the output menu.
Convenient
Functions Relating
to Output

Shimadzu ATX-R Series Specifications

General

Brand	Shimadzu
Model	ATX-R Series
Category	Scales
Language	English