Shimadzu ATX-R Series User Manual

90
V
Percentage Weighing
8
APPLICATION FUNCTION MODE
*
What to do if….
It is not possible to use a reference weight
such that the weight corresponding
to 100% is less than 100 times the
minimum indication of the balance.

Weighing Percentages
1
Establish the percentage weighing
mode.
If you have returned to the weighing mode (mode
where grams or other units are displayed) from
the percentage weighing mode, then long press
for about 3 seconds to enter the
percentage weighing mode.
*
If the percentage weighing mode
is not established…
The preparations for percentage
weighing have not been completed.
Make setting in accordance with
"Preparation for Percentage Weighing"
(^ page 87).
2
Place the container on the pan and press
The balance will be tared.
3
Insert the sample (item to be measured) into the container.
A percentage value obtained by conversion based on the set reference percentage value and
reference weight is displayed.
The operations of each of the keys after setting are summarized below.
On pressing twice.
The percentage reference value setting menu is displayed. (^ step 4
onward on pages 87 and 88.)
On pressing ...
The set reference weight (in grams) and the percentage indication are
displayed alternately. Press while the reference weight is displayed to
output the reference weight. While the reference weight is displayed, (the
hold display symbol) is displayed.
On long pressing
...
The 100% reference and specic percentage value are displayed alternately.
On long pressing
...
The mode is switched to the weighing mode.
Pressing the key again will return you to the percentage weighing mode.
! !1!0!0.0!0
The percentage weighing symbol
lights up.

Shimadzu ATX-R Series Specifications

General

Brand	Shimadzu
Model	ATX-R Series
Category	Scales
Language	English