Shimadzu ATX-R Series User Manual

BEFORE
WEIGHING
MAINTENANCE
TROUBLESHOOTING
FOR YOUR
INFORMATION
USING THE
BALANCE
USING MORE CONVENIENTLY
45
V
Continued on next page
Numerical values sometimes have to be entered for menu settings, for example the weight value of a
calibration weight, condition values for operating functions, the balance ID, passwords, etc.

Operations of the operation keys
Operation Key Operation During Numerical Value Entry
Conrms the entered numerical value
Increases the value of the digit to be entered (the ashing digit)
Pressing this key while the decimal point is ashing shifts the decimal point to the left.
Decreases the value of the digit to be entered (the ashing digit)
Pressing this key while the decimal point is ashing shifts the decimal point to the right.
Shifts the digit to be entered (the ashing digit) one digit to the right
Cancels entry

Changing the Numerical Value
As an example, here is the procedure for changing "120.0000 g" to "200.0000 g".
1
Enter the numeric value entry
mode.
(the number symbol) lights and the leftmost
digit (highest digit) in the range where the value
can be changed ashes.
2
Press once.
The numerical value of the ashing digit
increases by one, so that it changes from "1" to
"2".
3
Press
The ashing shifts to the second digit from the
left.
1!2!0.0!0!0!0
/
/
/
/
/
/
/
/
/
/
/
/
/
/
!2!2!0.0!0!0!0
/
/
/
/
/
/
/
/
/
/
/
/
/
/
2!2!0.0!0!0!0
/
/
/
/
/
/
/
/
/
/
/
/
/
/
Entering Numerical
Values

Shimadzu ATX-R Series Specifications

General

Brand	Shimadzu
Model	ATX-R Series
Category	Scales
Language	English