7
n I want to adjust the balance so that it is very accurate
after stabilization.
Span Calibration and Adjustment page 52
n I want to carry out calibration and output a record.
Leaving a Record of Calibration page 61
Calibration
n I want to send data to a PC (e.g. to Excel).
Balance keys page 118
n After weighing, I want to output automatically upon
stabilization.
Auto Print Function page 111
n I want to output data continuously.
Continuous Output Function page 113
n I want to output data either immediately or after stabilization.
Output Timing Change Function page 131
n I want to change the format of the decimal point
(comma or period) in the output data.
Selecting the Decimal Point Display Symbol page 39
n I want to add the balance model name,
ID and other information to weight readings.
GLP Output Function page 143
Printing /
output
n I want to display weights in units other than g (grams).
Switching Units page 37
Setting the Units page 77
n I want the power to turn off automatically when I am
not using the balance.
Auto Power-Off Function page 140
n I want to go directly into weighing mode when the power is
switched ON.
Setting the Startup Display page 141
Miscellaneous
To Next Page
Loading...
Need help?
General
