Shimadzu GCMS-QP2010 Series - Adding Batch Files

H Editing and Adding Batch Files During Sequential Analysis
102 GCMS-QP2010 Series Operation Guide
4
Name and save the batch file.
5
Quit the [GCMS Analysis Editor] program.
• The analysis will not start if the same data file name is used more than once or the specified
method file does not exist.
• The batch queue is not activated until the [GCMS Analysis Editor] program is closed.
H.2.2 Adding Batch Files
1
Start the [GCMS Real Time Analysis] program.
During analysis, both the [Acquisition] and [Batch Table] windows are displayed simultaneously.
[Batch Table] Window
[Acquisition] Window