Shimadzu GCMS-QP2010 Series - 2.6 Checking for Vacuum Leakage

GCMS-QP2010 Series Operation Guide 11
2.6 Checking for Vacuum Leakage
2
2.6 Checking for Vacuum Leakage
1
Wait for 10 minutes after starting up the vacuum system.
2
Click the [Tuning] icon on the [Real Time] assistant bar.
The [Tuning] window opens.
3
Click the [Peak Monitor View] icon on the [Tuning] assistant bar.
The [Peak Monitor] window opens.