3 SYSTEM DESCRIPTION
8026362 / V1-0/2022-03|SICK
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4100/5100
Subject to change without notice
Fig. 36: Sample label for the metrology information label, CE marking, and number of the notified
body with SIM2000-2 Prime controller type label
Legend
1 Metrology marking
2 Type label of the SIM2000-2 Prime controller
• A metrology identification label must also be attached.
• The metrology marking – M21 for the year 2021 in the above figure – must be
indicated in accordance with Article 21 of the MID.
• Additionally, the CE marking and the number of the notified body – 0102 for PTB in the
above figure – must be indicated.
• After successful commissioning and conformity assessment, the type label of the
SIM2000-2 Prime controller must be affixed to the metrology information label.
NOTE! The nature of the metrology information label must be such that its removal will
result in the destruction of the label itself or of a security seal.
Metrology information
label of the VMS5100
To Next Page
Loading...
Need help?
General
