Siecor 5000 Series - Menu Item Program Selection

Operating Instructions 3-5 M90 Fusion Splicer
Issue 02/97 Parameters and Programs
Menu Item "Program Selection"
In the menu item "Program selection" there are predefined program groups for various
applications. The parameters of each program can be changed and saved. Each pro-
gram group contains five programs which can naturally have different parameters.
Program selection Single-mode fibers
Multimode fibers
etc.
Program group
Fixed parameters (LID) 5
Faserabstand ....
Fixed parameters (LID) 4
Faserabstand ....Fixed parameters (LID) 3
Faserabstand ....
Fixed parameters (LID) 2
Faserabstand ....Fixed parameters (LID) 1
Fiber separation ....
Fixed parameters (video) 5
Faserabstand ....Fixed parameters (video) 4
Faserabstand ....
Fixed parameters (video) 3
Faserabstand ....
Fixed parameters (video) 2
Faserabstand ....Fixed parameters (video) 1
Fiber separation ....
etc.
Automatic fusion time 5
Faserabstand ....Automatic fusion time 4
Faserabstand ....
Automatic fusion time 3
Faserabstand ....
Automatic fusion time 2
Faserabstand ....Automatic fusion time 1
Fiber separation ....
Fixed parameters (LID) 5
Faserabstand ....
Fixed parameters (LID) 4
Faserabstand ....Fixed parameters (LID) 3
Faserabstand ....
Fixed parameters (LID) 2
Faserabstand ....
Fixed parameters (LID) 1
Fiber separation ....
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com