Notes on these Operating Instructions
Please read these Operating Instructions carefully and note the recommendations they
contain. This will ensure your splicer remains free of fault. Use the information set out in
the Operating Instructions to perform the necessary regular care and maintenance of
your splicer. Avoid damage by using extreme care.
If you are in doubt about any points, contact the relevant service center. The trained
experts available at these centers should be able to assist.
Incorrect or incomplete maintenance can impair the operation of your splicer.
The manufacturer's warranty obligations for the splicer shall be rendered null and void if
the unit has been tampered with by unauthorized persons.
Warranty
The Siecor M90 Fusion Splicer is warranted against defects in material and
workmanship for a period of one year from date of shipment. Any M90 found to be
defective during the warranty period may be returned, transportation prepaid, to the
factory for repair without charge.
This warranty does not apply to units which have been repaired or altered by an
unauthorized person, or which have been subject to misuse, negligence or accident.
A complete explanation of Siecor corporation´s warranties, and terms and conditions of
sale may be found on the reverse side of Siecor´s Quotations, Order Acknowledgement
and/or invoice forms and only the Warranty appearing thereon is to be considered
Siecor´s Warranty.
All inquiries regarding repairs or replacement parts should be directed to the Customer
Service Department, SIECOR CORPORATION, 489 Siecor Park, Hickory,
NC 28603-0489; (704) 327-5000. This will assure you the fastest possible service.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...