Siemens 6RA7086-6KS22

Function diagrams 05.05
8-54 SIEMENS AG 6RX1700-0AD76
SIMOREG DC Master Operating Instructions
Sheet G187 Messages (1)
0T
0 1
T0
0 1
0 1
&
0T
8
7
564321
- G187 -
1
0T
0 1
1
[G182.2]
[G182.2]
[G152.3] [G151.3] [G152.3] [G151.3] [G151.3] [G151.3]
[G140.2]
P388.F (3,00)
(0,00...199,99%)
P390.F (3,0)
(0,0...100,0 s)
P373.F (100,00)
(0,00...199,99%)
P374.F (3,00)
(0,00...199,99%)
P389.F (1,00)
(0,00...199,99%) P370.F (0,50)
(0,00...199,99%)
P590 (174)
K
P591 (167)
K
P375.F (3,0)
(0,0...100,0 s)
P593 (167)
K
P088 (0,00)
(0,00...10,00 s)
P371.F (0,50)
(0,00...199,99%)
P592 (167)
K
B0165 B0164
P376.F (3,00)
(0,00...199,99%)
P378.F (3,0)
(0,0...100,0 s)
P377.F (1,00)
(0,00...199,99%)
P596 (174)
K
P597 (167)
K
B0172 B0173
n(comp.)
OFF delay
n(comp.hyst.)
OFF shutdown speed
Firing pulse disable
OFF1 or OFF3 from
sequencing control
Comparison (time)
n(act)
Comparison (time)
OFF shutdown speed (hyst.)
Setp./act.val. dev. (perm.)
Setp./act.val. dev. (time)
OFF delay
Setp./act.val. hyst.
Signals (1)
n(act)
n(act)
Comparison setpoint reached to status word 1, bit 10
Setpoint/act. value deviation to status word 1, bit 8
0 = "Fault F031" 0 = "Alarm A031"
n(set, smooth)
n<n
min
Setp./act.val. dev. (perm.)
Setp./act.val. dev. (time)
OFF delay
Setp./act.val. hyst.
n(act)
Setpoint/act. value deviation 2
n(set, smooth)
(1 = Firing pulses disabled)