Step by Step
Programming the Handset
124
PIN
You can protect your optiPoint WL 2 professional
against unauthorized access by setting a PIN. You are
then prompted to enter the PIN when you activate the
handset Æ Page 15.
These entries can also be changed via the Web inter-
face Æ Page 132.
t Open the main menu.
2 Enter the code.
or
s OK Select and confirm.
s OK Select and confirm.
~ Enter the current PIN in the "Old PIN: “ entry field (if
available).
and
OK Confirm.
~ Enter the new PIN in the "New PIN:" entry field (four dig-
its, 0 to 9).
or To remove PIN protection:
Do not make an entry.
Save Press the display key to save the change.
” or u Quit the menu.
Settings
PIN
[- - - ]
[0077]
[- - - ]
Your handset will block after three failed at-
tempts to enter the PIN and can only be un-
locked by your service personnel.
To Next Page
Loading...
