Step by Step
Making Calls – Enhanced Functions
42
Rejecting Calls
You can reject calls which you do not wish to take. The
call is then signaled at another definable telephone
(contact your service personnel).
The telephone rings. The caller is displayed.
a Press the on-hook key.
If call rejection is not permitted, your telephone will con-
tinue to ring. The message "Currently not possible" is
displayed (for example, in the case of recalls).
Using the Speakerphone
A colleague addresses you directly over the speaker.
You hear a tone before the announcement. The other
party’s name or station number appears on the screen.
You can reply to the call in handsfree answerback mode.
c or d Press the talk key or the speakerphone key and reply.
or
OK Press the key to confirm your selection and answer the
call.
Enabling and disabling handsfree answerback
r OK Select and confirm.
or
r OK
or
*OL Code for "HF answerback on"
or
#OL Enter the code for "HF answerback off".
Mute off?
If handsfree answerback is enabled (see below),
you do not need to switch on the microphone -
you can answer directly. You can answer immedi-
ately in speakerphone mode.
If handsfree answerback is disabled (default set-
ting), follow the procedure described above.
Placing a speaker call to a colleague Æ Page 55.
HF answerback on?
HF answerback off?
To Next Page
Loading...
