Siemens HIPATH 2000 Operating Manual

Reference Guide
139
Step by Step
Possible cause 1:
If "Delete other layer" appears on the menu:
you tried to program a function or internal station num-
ber with LED on a key that is already programmed on
the second layer (for example, external station number).
Possible response:
Confirm "Delete other layer" to program the station
number/function.
Possible cause 2:
If "Delete LED support" appears on the menu:
you tried to program a station number without LED or
an external station number on a key that is already pro-
grammed with an internal station number with LED.
Possible response:
Confirm "Delete LED support" to save the station num-
ber. The internal station number already programmed
remains on the other layer without LED display.
Possible cause:
You are outside the WLAN access point range.
Possible response:
Scan Press the display key. The Connect. Assistant starts
Æ Page 129.
Contacts in the Event of Problems
If you encounter a problem that lasts longer than five
minutes, contact your service personnel.
Key affects other layer
No Access Point
No Server

Siemens HIPATH 2000 Specifications

General

Brand	Siemens
Model	HIPATH 2000
Category	Telephone
Language	English