Step by Step
Making Calls – Enhanced Functions
44
Answering Calls from the Entrance
Telephone and Opening the Door
If an entrance telephone has been programmed, you
can use your handset to speak to someone at the en-
trance telephone and activate a door opener.
If you have the proper authorization (contact your ser-
vice personnel), you can activate the door opener, en-
abling visitors to open the door themselves by entering
a five-digit code (for example, using a DTMF transmitter
or installed keypad).
Speaking to visitors via the entrance telephone:
Precondition: Your telephone rings.
c Press the talk key within 30 seconds. You are connect-
ed to the entrance telephone immediately.
or
c Press the talk key after more than thirty seconds.
~ Dial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone:
OK Confirm.
Opening the door from your telephone without
calling the entrance telephone:
FCN Press the display key.
OK Confirm.
r OK Select and confirm.
or
*L1 Enter the code.
~ Dial the entrance telephone number.
Opening the door with a code (at the door):
~ After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.
Open door?
Program/Service
*
61=Open door?
To Next Page
Loading...
Need help?
General