Siemens HIPATH 2000 Operating Manual

Making Calls – Enhanced Functions
57
Step by Step
Assigning a Station Number (Not for U.S.)
If this function has been configured (contact your ser-
vice personnel), you can assign a specific number (DID
number) to your telephone before making an external
call. The assigned number then appears on the called
party’s display.
FCN Press the display key.
OK Confirm.
r OK Select and confirm.
or
*41 Enter the code.
~ Enter the DID number you wish to use.
~ Dial the external number.
Associated Dialing/Dialing Aid
If this function has been configured (contact your ser-
vice personnel), you can use a dialing aid to dial num-
bers and set up calls for your telephone.
The operating procedure depends on whether the dial-
ing aid is connected to the S
0
bus or the a/b (T/R) port.
You can also use your system telephone as a dialing aid
for other telephones.
Dialing aid on the S
0
bus:
On the PC, select a destination and start dialing.
d The speaker on your telephone is switched on. Press
the speakerphone key when the other party answers.
Dialing aid at the a/b (T/R) port:
On the PC, select a destination and start dialing.
"Lift the handset" appears on the PC screen.
c Press the talk key.
Program/Service
*
41=Temporary MSN?

Siemens HIPATH 2000 Specifications

General

Brand	Siemens
Model	HIPATH 2000
Category	Telephone
Language	English