Making Calls – Enhanced Functions
49
Step by Step
Speed Dialing
Using station and system speed-dial numbers
Precondition: You have stored station speed-dial num-
bers Æ Page 49 or the service personnel has stored
system speed-dial numbers.
FCN Press the display key.
OK Confirm.
r OK Confirm
[1]
,
or
*M Enter the code.
~ Enter a speed-dial number.
"
*
0" to "
*
9" = station speed-dialing.
"000" to "999" = system speed-dialing (contact your ser-
vice personnel).
If applicable Suffix-dialing
~ If necessary, you can suffix-dial additional digits
(for example, the user’s extension) at the end of the
saved station number.
If this feature is configured, a suffix is automatically di-
aled (for example, "0" for the exchange) if no entries are
made within 4 or 5 seconds.
Storing station speed-dial numbers
You can store the ten numbers which you use the most
and dial them using your own station speed-dial num-
bers:
*
0 through
*
9 Æ Page 49.
FCN Press the display key.
OK Confirm.
r OK Select and confirm
1
.
or
*O2 Enter the code.
~ Enter the speed-dial number you wish to use (
*
0 to
*
9). If the speed-dial number is already in use, the pro-
grammed station number appears on the screen.
OK
OK
Confirm.
Program/Service
*7=Use speed dialing?
[1] ”Different Displays (HiPath 4000 Environment)”
Æ Page 135
Program/Service
*
92=Change Speed Dial?
US: Change?
UK: Change entry?