Siemens HIPATH 2000 - Call Forwarding; Using Variable Call Forwarding

Step by Step
Making Calls – Basic Functions
32
Call Forwarding
Using Variable Call Forwarding
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
r OK Select and confirm.
or
*1 Enter the code.
OK Confirm.
or
r OK Select and confirm.
or
r OK Select and confirm.
or
1 or 2 or I Enter the code.
~ Enter the destination number.
OK
OK
Confirm.
Deactivating call forwarding:
r OK Select and confirm.
or
#1 Enter the code.
Forwarding on?
1=all calls?
2=external calls only?
3=internal calls only?
US: Save?
UK: Save entry?
Forwarding off?
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.
If you are a call forwarding destination, your dis-
play will show the station number or the name of
the originator on the upper line and that of the
caller on the lower line.