Siemens HIPATH 2000 Operating Manual

Step by Step
Additional Features/Services
96
Using System Functions from an
External Location (DISA - Direct In-
ward System Access)
If this function has been configured (contact your ser-
vice personnel), you can set up external outgoing calls
from outside the system, as if you were an internal
user. You can also activate and deactivate the following
functions in your system:
• Reset services and functions,
code #0 Æ Page 94
• Call forwarding, code:
*
1/#1 Æ Page 32
• Locking and unlocking telephone,
code
*
66/#66 Æ Page 87
•Save PIN,
code:
*
93 Æ Page 89
• Send a message,
code:
*
68/#68 Æ Page 90
• Leave an advisory message,
code
*
69/#69 Æ Page 91
• Group ringing, code:
*
81/#81 Æ Page 103
• Group call, code:
*
85/#85 Æ Page 103
• Suppress call ID,
code:
*
86/#86 Æ Page 84
• Waiting tone, code:
*
87/#87 Æ Page 60
• Open door, code:
*
61 Æ Page 44
• Door opener on/off, code:
*
89/#89 Æ Page 45
• Control relay, code
*
90/#90 Æ Page 101
• Do not disturb, code:
*
97/#97 Æ Page 83
• Ringer cutoff function, code:
*
98/#98 Æ Page 83
• Speed-dialing, code:
*
7 Æ Page 49
• Associated service, code:
*
83 Æ Page 95
Precondition: You have a telephone that uses tone di-
aling (DTMF dialing) or you can switch your telephone
to tone dialing. The telephone is not connected to the
system.
~ Set up a call to the system. Enter the station number
(contact your service personnel).
Ö ~ Wait for a continuous tone (if necessary switch the tele-
phone to tone dialing), then enter the internal number
that has been assigned to you and the associated PIN.
# Enter the code (necessary only if programmed in the
system).

Siemens HIPATH 2000 Specifications

General

Brand	Siemens
Model	HIPATH 2000
Category	Telephone
Language	English