Siemens HIPATH 2000 Operating Manual

Making Calls – Enhanced Functions
61
Step by Step
Parking a Call
You can park up to ten calls, either internal, external, or
both. Parked calls can be displayed on and picked up
from another telephone. This feature is useful,
for example, if you want to continue a call at another
phone.
Precondition: You are conducting a call.
FCN Press the display key.
OK Confirm.
r OK Select and confirm.
or
*5L Enter the code.
Q ... O Enter the number of the park slot (0 - 9) and make a note
of it. If the park slot number you entered is not dis-
played, it is already in use; enter another one.
Retrieving a parked call
Precondition: One or more calls have been parked. The
telephone is idle.
FCN Press the display key.
OK Confirm.
r OK Select and confirm.
or
#5L Enter the code.
Q ... O Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you can-
not retrieve the call.
Program/Service
*
56=Park a call?
Program/Service
Retrieve call?
If a parked call is not resumed within a specific pe-
riod of time, it is returned to the telephone from
where it was parked (recall).

Siemens HIPATH 2000 Specifications

General

Brand	Siemens
Model	HIPATH 2000
Category	Telephone
Language	English