Siemens HIPATH 2000 Operating Manual

Privacy/Security
83
Step by Step
Privacy/Security
Turning Ringer Cutoff On and Off
You can activate the ringer cutoff function if you do not
want the receive any calls. Calls are only identified by
one ring signal, an indication on the display, and by a
flashing icon associated with a programmed FCN entry.
r OK Select and confirm
[1]
.
or
r OK
or
*ON Enter the code for "Ringer cutoff on".
or
#ON Enter the code for "Ringer cutoff off".
Activating/Deactivating Do Not Disturb
You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is acti-
vated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this pur-
pose (contact your service personnel).
r OK Select and confirm.
or
r OK
or
*OM Enter the code for "DND on".
or
#OM Enter the code for "DND off".
Ringer cutoff on?
[1] ”Different Displays (HiPath 4000 Environment)”
Æ Page 135
Ringer cutoff off?
DND on?
DND off?
When you press the talk key, a special dial tone
(continuous whirring tone) reminds you that DND
is on.
Authorized internal callers can automatically
override the do not disturb function after five sec-
onds.

Siemens HIPATH 2000 Specifications

General

Brand	Siemens
Model	HIPATH 2000
Category	Telephone
Language	English