PFA-100 System – Instruction Manual (US) – Version 1.0.1
1411
7. Push the paper inside the printhead.
8. From the System Ready display, press the softkey located next to
Menus.
9. From the Menu display, press the numeric key 2 to select the
Maintenance option.
10. Press the numeric key 1 to select the Paper Advance option.
11. Press the softkey located next to Load to advance the paper into the
printer.
12. Press the softkey located next to Ready Screen to return to the System
Ready display.
Figure 11-4 Printer ribbon
PUSH
EJECT
Printhead
Paper
Ribbon cartridge
Run
Print Last Run
Menus
System Ready
Insert Sample(s)
Then Press Run
01/11/07 10:30 AM
1 - Run Control
2 - Maintenance
3 - Setup
4 - Print Log Previous Screen
1 - Paper Advance
2 - Self Test
3 - Printer Test
4 - Trigger Prime
5 - Clean O-Ring
6 - Remove O-Ring
7 - Install O-Ring
Previous Screen
To Next Page
Loading...
