Siemens PFA-100 System - Checking for Correct Installation

3 Delivery and installation
PFA-100 System – Instruction Manual (US) – Version 1.0.1
193
3
4. Push lever down.
5. Load cassette and the blue priming cartridge into the carousel.
The system is now ready for priming.
3.2.3.6 Checking for correct installation
The analyzer has been installed correctly if the Self Test is passed without
generating an error message.
1. Check for correct installation using the Self Test function from the
Maintenance menu.
For a quick reference on how to perform a Self Test see Chapter 4, for
details refer to Chapter 9.1 and/or Chapter 12.2, respectively.