Siemens PFA-100 System - Performing Tests; Sample Loading

8 Performing tests
PFA-100 System – Instruction Manual (US) – Version 1.0.1
18
8
8 Performing tests
This chapter contains information about:
• Sample loading (Chapter •)
• Test requests (Chapter 8.1 and Chapter 8.2)
• Canceling test results (Chapter 8.3)
• Printing results (Chapter 8.4)Sample loading
To insert PFA test cartridges into the analyzer, proceed as follows:
1. Peel off and discard the top foil seal of the PFA test cartridge.
Note: General information on handling and collection of blood samples
as well as detailed information on performance and applications of each
PFA test cartridge type is described in the specific instructions for use
of the PFA test cartridge types.
Figure 8-1 PFA test cartridge
CAUTION
Touching the analyzer carousel while it is turning may result in
pinching of fingers.
Minor or moderate injury can result.
• Always wait until the measurement has finished before inserting or
removing cartridges.