PFA-100 System – Instruction Manual (US) – Version 1.0.1
67
7 Setup and changing configuration
4. To return to the System Ready display, press the softkey located next
to Previous Screen twice.
7.2.3 Setting the date format
To set the date format, proceed as follows:
1. From the System Ready display, press the softkey located next to
Menus.
2. Press the numeric key 3 to select the Setup option.
3. Press the numeric key 3 to select the Set Date option.
The screen will display (above the date) the currently selected format.
4. To change the format, press the softkey located next to the desired
option.
The new format will be displayed above the date.
5. To change the date, use the < key to erase the existing date, then use
the numeric keys to enter the new date (enter 0 first if a singledigit month
or day is entered, e.g., 01/01/01) (displayed from left to right).
6. To save the selection, press the softkey located next to Enter.
Run
Print Last Run
Menus
System Ready
Insert Sample(s)
Then Press Run
01/11/07 10:30 AM
1 - Run Control
2 - Maintenance
3 - Setup
4 - Print Log Previous Screen
Previous Screen
1 - Select Language
2 - Set Defaults
3 - Set Date
4 - Set Time
Enter
MM/DD/YY
DD/MM/YY
Previous Screen
MM/DD/YY
01/11/07
To Next Page
Loading...
