7 Setup and changing configuration
PFA-100 System – Instruction Manual (US) – Version 1.0.1
117
7.3.2 Audible keys
This option allows the operator to enable or disable an audible tone to
sound when a softkey or a numeric key is pressed.
To enable or disable the audible tone, proceed as follows:
1. From the System Ready display, press the softkey located next to
Menus.
2. Press the numeric key 3 to select the Setup option.
3. Press the numeric key 2 to select the Set Defaults option.
4. Press the numeric key 3 to select the Audible Keys option.
5. Press the softkey located next to Yes to enable the option or No to
disable the option.
6. Press the softkey located next to Previous Screen three times to return
to the System Ready display.
Run
Print Last Run
Menus
System Ready
Insert Sample(s)
Then Press Run
01/11/07 10:30 AM
1 - Run Control
2 - Maintenance
3 - Setup
4 - Print Log Previous Screen
Previous Screen
1 - Select Language
2 - Set Defaults
3 - Set Date
4 - Set Time
Previous Screen
1 - Flags
2 - Patient ID
3 - Audible Keys
4 - LIS
To Next Page
Loading...
