PFA-100 System – Instruction Manual (US) – Version 1.0.1
47
7 Setup and changing configuration
3. Press the numeric key 1 to select the Select Language option.
4. Press the numeric key corresponding to the desired language.
The system will display and print in the selected language.
5. To return to the System Ready display, press the softkey located next
to Previous Screen twice.
7.2.2 Setting the time format
12-hour format To select the time in a 12-hour format, proceed as follows:
1. From the System Ready display, press the softkey located next to
Menus.
2. Press the numeric key 3 to select the Setup option.
3. Press the numeric key 4 to select the Set Time option.
Previous Screen
1 - Select Language
2 - Set Defaults
3 - Set Date
4 - Set Time
4. Francais
5. Italiano
1. Deutsch
2. English
3. Español
Run
Print Last Run
Menus
System Ready
Insert Sample(s)
Then Press Run
01/11/07 10:30 AM
1 - Run Control
2 - Maintenance
3 - Setup
4 - Print Log Previous Screen
Previous Screen
1 - Select Language
2 - Set Defaults
3 - Set Date
4 - Set Time
To Next Page
Loading...
