Siemens PFA-100 System - Laboratory Information System (LIS)

PFA-100 System – Instruction Manual (US) – Version 1.0.1
127
7 Setup and changing configuration
7
7.3.3 Laboratory information system (LIS)
This option allows the user to transmit the printed results to a host computer
via the external PC port.
To select the laboratory information system, proceed as follows:
1. From the System Ready display, press the softkey located next to
Menus.
2. From the Menu display, press the numeric key 3 to select the Setup
option.
3. Press the numeric key 2 to select the Set Defaults option.
4. Press the numeric key 4 to select the LIS option.
5. Press the softkey next to Enable to turn on the transmission of results
or Disable to turn it off.
Run
Print Last Run
Menus
System Ready
Insert Sample(s)
Then Press Run
01/11/07 10:30 AM
1 - Run Control
2 - Maintenance
3 - Setup
4 - Print Log Previous Screen
Previous Screen
1 - Select Language
2 - Set Defaults
3 - Set Date
4 - Set Time
Previous Screen
1 - Flags
2 - Patient ID
3 - Audible Keys
4 - LIS
Enable
Disable
Continue
Results Upload to LIS