6 Description of the analyzer
PFA-100 System – Instruction Manual (US) – Version 1.0.1
96
6.3.5 Printer
6.3.6 Software
6.4 Data connections
Barcode scanner port The barcode scanner port can be used to connect the analyzer to a barcode
scanner. The barcode scanner reads the bar code label placed on the
sample tube, the number is transmitted to the analyzer and is used as the
patient ID number at the start of a run.
External PC port The external PC port can be used to download the electronic data to an
external computer via a suitable interface software.
Refer to Chapter 6.3 for the respective technical specifications.
Note: During sound pressure level measurement the machine is
operated as in normal use with all accessories connected. The sound
pressure level was measured from a distance of 1 meter from the
surface of the machinery and a height of 1.6 meters from the floor or
access platform. The measurement was made using an A-weighted
sound pressure level meter. The ambient noise was measured as
42dBA.
Parameter Value
Type 24 character wide impact
Ribbon Epson No. ERC-22 black or
Epson No. ERC-09 purple
Paper 58 mm wide standard cash register
or adding machine paper
Parameter Value
External computer
Interface connector
RS232
25 pin D-connector
Barcode Scanner Optional
Patient ID Maximum 12 characters
Stored control results Last 50 results
Stored patient results Last 20 results
Software update PCMCIA card
To Next Page
Loading...
