PFA-100 System – Instruction Manual (US) – Version 1.0.1
99
9.3 Printing control results
To print the results of the control runs, proceed as follows:
1. From the System Ready display, press the softkey located next to
Menus.
2. From the Menu display, press the numeric key 4 to select the Print Log
option.
3. From the Print Log display, press the numeric key 2 to select the
Control Results option.
4. Use the numeric keypad to enter the number of control results to be
printed, then press the softkey located next to Enter.
The system will print the number of results entered, starting with the
most recent control performed.
Run
Print Last Run
Menus
System Ready
Insert Sample(s)
Then Press Run
01/11/07 10:30 AM
1 - Run Control
2 - Maintenance
3 - Setup
4 - Print Log Previous Screen
Previous Screen
1 - Patient Results
2 - Control Results
3 - Usage History
4 - Error Log
Enter
Previous Screen
Number of Control Results
To Print (Between 1 and 50)
To Next Page
Loading...
