PFA-100 System – Instruction Manual (US) – Version 1.0.1
128
8.4.4 Printing usage history
When printing a usage history, the system will print the serial number and
the software version of the analyzer, the date and time, and the number of
tests performed by the analyzer over the last 30 days, and since the
installation.
To print a usage history, proceed as follows:
1. From the System Ready display, press the softkey located next to
Menus.
2. Press the numeric key 4 to select the Print Log option.
3. Press the numeric key 3 to select the Usage History option.
The system prints the usage history.
4. To return to the System Ready display, press the softkey located next
to Previous Screen twice.
Run
Print Last Run
Menus
System Ready
Insert Sample(s)
Then Press Run
01/11/07 10:30 AM
1 - Run Control
2 - Maintenance
3 - Setup
4 - Print Log Previous Screen
Previous Screen
1 - Patient Results
2 - Control Results
3 - Usage History
4 - Error Log
To Next Page
Loading...
