Siemens PFA-100 System - Trigger Solution Compartment; LCD Display

6 Description of the analyzer
PFA-100 System – Instruction Manual (US) – Version 1.0.1
36
6
6.1.2 Trigger solution compartment
The trigger solution compartment is located on the right front of the
analyzer. The compartment is opened by lifting the knob all the way up. The
replaceable bottle of trigger solution is located inside this compartment.
When the bottle is empty, the system will display a message to replace the
trigger solution.
6.1.3 LCD display
The LCD display is located on the upper front of the analyzer and displays
the software commands for running samples, running control, maintenance,
setup, and printing data.
Display saver The system will automatically turn off the LCD backlight after 5 minutes of
inactivity following the conclusion of a test or if no key has been pressed for
the same length of time.
1. Press any key to turn the light on again.
Figure 6-3 Trigger solution compartment
Trigger
solution
bottle