PFA-100 System – Instruction Manual (US) – Version 1.0.1
412
12 Diagnostics and troubleshooting
No Closure is displayed with the test result. The status message is
displayed in the bottom line.
Sample A:
CT = >300 sec No Closure
Maximum Test Time Exceeded
Sample A:
CT = >xxx sec No Closure
Maximum Syringe Travel Reached
Sample A:
CT = >xxx sec No Closure
Sample Depleted
Note: Refer to Chapter 12.5 and Chapter 12.6 for full explanation of the
status messages shown above.
To Next Page
Loading...
